Webster, J., Tricard, M. (2004). Innovations in abrasive products for precision grinding, CIRP Ann. - Manuf. Technol., 53(2), 597–617, 2004, doi: 10.1016/S0007-8506(07)60031-6 .

Brinksmeier, E., Mutlugünes, Y., Klocke, F., Aurich, J. C., Shore, P., Ohmori, H. (2010). Ultra-precision grinding,” CIRP Ann., 59(2), 652–671. doi: 10.1016/J.CIRP.2010.05.001.

Badger, J., Murphy, S., O’Donnell, G. E. (2010). Loading in Grinding: Chemical Reactions in Steels and Stainless Steels,” Adv. Mater. Res., 126–128, 597–602. doi: 10.4028/www.scientific.net/AMR.126-128.597.

Patnaik Durgumahanti, U. S., Singh, V., Venkateswara Rao, P. (2010). A New Model for Grinding Force Prediction and Analysis, Int. J. Mach. Tools Manuf., 50(3), 231–240, doi: 10.1016/J.IJMACHTOOLS.2009.12.004.

Najih, Y., Adar, M., Medkour, M., Bengourram, J., Mabrouki, M. (2023). The Effect of Roughness on the Physicochemical Properties of a36 Steel: Phosphate Adhesion Study, J. Chem. Technol., 31(3), 581–589, doi: 10.15421/jchemtech.v31i3.278149.

Costa, D. O. (2013). The differential regulation of osteoblast and osteoclast activity by surface topography of hydroxyapatite coatings, Biomaterials, 34(30), 7215–7226. doi: 10.1016/j.biomaterials.2013.06.014.

Advincula, M.C., Rahemtulla, F.G., Advincula, R. C., Ada, E.T., Lemons, J. E., Bellis, S. L. (2006). Osteoblast adhesion and matrix mineralization on sol-gel-derived titanium oxide., Biomaterials, 27(10), 2201–2212, doi: 10.1016/j.biomaterials.2005.11.014.

Lampin, M., Warocquier-Clérout, C., Legris, M., Degrange, Sigot-Luizard, M. F. (1997). Correlation between substratum roughness and wettability, cell adhesion, and cell migration., J. Biomed. Mater. Res., 36(1), 99–108, doi:10.1002/(sici)1097-4636(199707)36:1<99::aid-jbm12>3.0.co;2-e.

Rouahi, M., Champion, E., Hardouin, P., Anselme, K. (2006). Quantitative kinetic analysis of gene expression during human osteoblastic adhesion on orthopaedic materials, Biomaterials, 27(14), 2829–2844 doi: 10.1016/J.BIOMATERIALS.2006.01.001.

Dasgupta, S., Tarafder, S., Bandyopadhyay, A., Bose, S. (2013). Effect of grain size on mechanical, surface and biological properties of microwave sintered hydroxyapatite., Mater. Sci. Eng. C. Mater. Biol. Appl., 33(5), 2846–2854, doi: 10.1016/j.msec.2013.03.004.

Y. Wang, S. Zhang, X. Zeng, L. L. Ma, K. A. Khor, and M. Qian, “Initial attachment of osteoblastic cells onto sol-gel derived fluoridated hydroxyapatite coatings,” J. Biomed. Mater. Res. Part A, vol. 84A, no. 3, pp. 769–776, 2008, https://doi.org/10.1002/jbm.a.31289.

Yang, L., Perez-Amodio, S., Barrère-de Groot, F. Y. F., Everts, V., van Blitterswijk, C. A., Habibovic, P. (2010). The effects of inorganic additives to calcium phosphate on in vitro behavior of osteoblasts and osteoclasts.,” Biomaterials, 31(11), 2976–2989, doi: 10.1016/j.biomaterials.2010.01.002.

Autumn, K., Gravish, N. (2008). Gecko adhesion: evolutionary nanotechnology, Philos. Trans. R. Soc. A Math. Phys. Eng. Sci., 366(1870), 1575–1590, 2008, doi: 10.1098/rsta.2007.2173.

Wang, L., Zhou, Q. (2014). Nepenthes pitchers: surface structure, physical property, anti-attachment function and potential application in mechanical controlling plague locust, Chinese Sci. Bull., 59(21), 2513–2523, doi: https://doi.org/10.1007/s11434-014-0383-6.

Feng L. (2002). Super-Hydrophobic Surfaces: From Natural to Artificial, Adv. Mater., 14(24), 1857–1860, doi: https://doi.org/10.1002/adma.200290020.

Guo, Z., Liu, W., Su, B.-L. (2011). Superhydrophobic surfaces: from natural to biomimetic to functional., J. Colloid Interface Sci., 353(2), 335–355, doi: 10.1016/j.jcis.2010.08.047.

Bhushan, B. (2009). Biomimetics: lessons from nature–an overview, Philos. Trans. R. Soc. A Math. Phys. Eng. Sci., 367(1893), 1445–1486, doi: 10.1098/rsta.2009.0011.

Elyaagoubi, M., Najih, Y., Khadiri, M., Mabrouki, M., Oueriagli, A., Outzourhit, A. (2017). Electrochemically deposited Bismuth-Telluride nanowires in nanoporous alumina, Мembranes, 8, 2070–2075.

Najih, Y. Adar, M. Charafih, Y. Rahmani, K. Khaouch, Z. Mabrouki, M. (2019). Elaboration and characterization of zno thin films structural and optical study, J. Phys. Conf. Ser., 1292(1), doi: 10.1088/1742-6596/1292/1/012009.

Adar, M., Najih, Y., Charafih, Y., Rahmani, K., Khaouch, Z., Mabrouki, M. (2019). Elaboration and characterization of zno thin films structural and optical study,” in Journal of Physics: Conference Series, doi: 10.1088/1742-6596/1292/1/012009.

Jeandin, M., Koivuluoto, H., Vezzu, S. (2015). Coating Properties BT - Modern Cold Spray: Materials, Process, and Applications, J. Villafuerte, Ed., Cham: Springer International Publishing, 107–224. doi: 10.1007/978-3-319-16772-5_4.

Wu, S. (1982). Polymer interface and adhesion. New York SE – Marcel Dekker New York. doi: LK - https://worldcat.org/title/807302380.

Weiss, H. (1995). Adhesion of advanced overlay coatings: mechanisms and quantitative assessment, Surf. Coatings Technol., 71(2), 201–207, doi: 10.1016/0257-8972(94)01022-B.

Anjjar, A., Driouch, Y., Benjelloun, F., Hmeid, H. A., El Alami, A. (2020). The phosphate series of Benguerir (Maastrichtian-Ypresian, Morocco): Mineralogy and mine planning, J. Mater. Environ. Sci, 2020(4), 574–583.

Henri C. (2014). Marine vertebrate faunas from the Maastrichtian phosphates of Benguerir (Ganntour Basin, Morocco): Biostratigraphy, palaeobiogeography and palaeoecology, Palaeogeogr. Palaeoclimatol. Palaeoecol., 409. doi: 10.1016/j.palaeo.2014.04.020.

Daafi, Y., Chakir, A., Jourani, E., Ouabba, S. M. (2014). Geology and Mine Planning of Phosphate Deposits: Benguerir Deposit Gantour Basin – Morocco, Procedia Eng., 83, 70–75, doi: 10.1016/J.PROENG.2014.09.014.

Hamadi F., Latrache, H. (2008). Comparison of contact angle measurement and microbial adhesion to solvents for assaying electron donor–electron acceptor (acid–base) properties of bacterial surface, Colloids Surfaces B Biointerfaces, 65(1), 134–139. doi: 10.1016/J.COLSURFB.2008.03.010.

Os, V. (2006). Interfacial Forces in Aqueous Media (2nd ed.). New Yourk: CRC press. doi: https://doi.org/10.1201/9781420015768.

Young, T. (1805). III. An essay on the cohesion of fluids,” Philos. Trans. R. Soc. London, 95, 65–87. doi: 10.1098/rstl.1805.0005.

Van Oss, C.-J. Good, R.-J., Chaudhury, M.-K. (1986). The role of van der Waals forces and hydrogen bonds in ``hydrophobic interactions’’ between biopolymers and low energy surfaces, J. Colloid Interface Sci., 111(2), 378–390, doi: 10.1016/0021-9797(86)90041-X.

Van Oss, C. J., Chaudhury, M. K., Good, R. J. (1986). Monopolar surfaces, Adv. Colloid Interface Sci., 28(C),. 35–64, doi: 10.1016/0001-8686(87)80008-8.

Morra M., Cassinelli, C. (1997). Bacterial adhesion to polymer surfaces: a critical review of surface thermodynamic approaches., J. Biomater. Sci. Polym. Ed., 9(1), 55–74, doi: 10.1163/156856297x00263.