Van, B. A. (2012). Advanced Еngineering Design. Design forreliability. Delft: Delft Universityof Technology Mechanical Engineering.

Sharvan, К., Nitin, Р.Р. (2018). Materials in the Aircraft Industry.Metallurgical Design and Industry, 271–346. https://doi.org/10.1007/978-3-319-93755-7_5

Aulin, V., Lyashuk, O., Gupka, A., Tson, O., Mironov, D., Sokol, M., Leshchuk, R., Yarema, I.(2024). Tribodiagnosis of the surface damage of tribo-coupling part smaterials during machine operation. Procedia Structural Integrity, 59, 428–435. https://doi.org/10.1016/j.prostr.2024.04.061

Zakalov, O.V., Zakalov, I.O. (2011). [Basics of friction and wear in machines]. Ternopil, Ukraine: I.Puliuy National Technical University of Ternopil, 322p.

(in Ukrainian).

Kabat, O. S., Kobets, A.S., DerkachO. D., Makarenko, D.O., Hnatko, O. M. (2024). Practice of using parts made of the heat-resistant polymer composites in the chemical industry and agricultural engineering.ARPN Journal of Engineering and Applied Sciences, 19(1), 40–47.https://www.arpnjournals.org/jeas/research_papers/rp_2024/jeas_0124_9384.pdf

Кabat, О., S., Girin, O., Heti, K. (2023). Polymer composites based on aromatic polyamide and fillers of spherical and layered structure for friction units of high-performance equipment. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 237(11), 2669–2676. https://doi.org/10.1177/14644207231176796

Sytar, V., Kuzyayev, I., Kabat, O., Kudrayvtsev, A. (2023). Heat-resistant gas-filled composites based on phenylon and inorganic pore formers. Journal of Chemistry and Technologies, 31(1), 120–127. https://doi.org/10.15421/jchemtech.v31i1.268810

Kabat, O., Makarenko, D., Derkach, O., Muranov, Y. (2021). Determining the influence of the filler on the properties of structural thermal-resistant polymeric materials based on phenylone C1. Eastern-European Journal of Enterprise Technologies, 5/6(113), 24–29. https://doi.org/10.15587/1729-4061.2021.243100

Yinga, L., Xueshia, C., Zhang, J. (2024). A study on improving friction and wear performance of bearing bush in radial piston hydraulic motor. Wear, 546–547. https://doi.org/10.1016/j.wear.2024.205317

Kobets, А., Aulin, V., Derkach, O., Makarenko, D., Hrynkiv, A., Krutous, D., Muranov, E. (2020). Design of mated parts using polymeric materials with enhanced tribotechnical characteristics. Eastern-European Journal of Enterprise Technologies, 5–12(107), 49–57. https://doi.org/10.15587/1729-4061.2020.214547

He, Y., Walsh, D., Shi, C. (2015). Fluoropolymer composite coating for condensing heat exchangers: characterization of the mechanical, tribological and thermal properties. Appl Therm Eng, 91, 387–398. https://doi.org/10.1016/j.applthermaleng.2015.08.03

Danavath, В., Piyush, С. V., Suresh, K. R.N., Sujith, R., Prabakaran, S. (2024). Tribological Investigation of Chemically Modified Polytetrafluoroethylene Coating for Hydrogen Valve Application. Tribology Letters, 72(3), 72–82. https://doi.org/10.1007/s11249-024-01869-x

Kangan, Q.,Qing, P.(2024). Tribological characteristics and wear mechanisms of reinforced composites against steel. Journal of Thermoplastic Composite Materials, 37(7). https://doi.org/10.1177/089270572 3120

Shengkang, D., Zhiwei, G., Hongshuang, Z., Chengqing, Y. (2023). Effect of Silicon Carbide Particles on Tribological Properties of Polytetrafluoroethylene Water-Lubricated Bearing Composites. J. of Materi Eng and Performe, 33, 5667–5681. https://doi.org/10.1007/s11665-023-08337-y

PTFE Powder.https://stargetfluoro.com/product/ptfe-powder/

PTFE Molding Powder 101.https://stargetfluoro.com/wp-content/uploads/2023/06/PTFE-Molding-Powder-101.pdf

PTFE Molding Powder 161.https://stargetfluoro.com/wp-content/uploads/2023/ 06/PTFE-Molding-Powder-161.pdf

Kabat,_O.S., Kharchenko, B.G., Derkach, A.D., Artemchuk, V.V., Babenko, V.G. (2019). [Polymer composite materials based on fluoroplastic and the method of their production]. Voprosy Khimii i Khimicheskoi Tekhnologii, 3, 166–122. (In Russian). http://dx.doi.org/10.32434/0321-4095-2019-124-3-116-122

Kabat, O. S., Dusheiko, M. V. (2017). [Polymer composite materials for special purposes based on fluoroplastic]. Technological Systems, 4(81), 63–67. (in Ukrainian). http://dx.doi.org/10.29010/081.8

Каbаt, O.S., Derkach, O.D., Pavlushkina, N.V., Pikula, І.І.(2019). Polymeric composites of tribotechnical purpose based on fluoropolymers. Problems of Tribology, 92(2), 75–81.https://doi.org/10.31891/ 2079-1372-2019-92-2-75-81

Kabat, O.S., Heti, K. V., Kovalenko, I. L., Dudka, A. М. (2019). Fillers on the silica base for polymer composites of constructional purpose. Journal of chemistry and technologies, 27(2), 247–254. https://doi.org/10.15421/08192702

Weixuan, L., Wang, T., Wang, Q., Yap, K.K., Song, F., Wang, C. (2024). Tribological and Mechanochemical Properties of Nanoparticle-Filled Polytetrafluoro-ethylene Composites under Different Loads. Polymers, 16. https://doi.org/10.3390/polym16 070894

Sun, W., Jiaxin, Y., Yunlong, J., Xiaojun, L. (2024). Nanofiller tribochemical functionality is not sufficient to achieve ultralow wear of PTFE. Wear, 548–549. doi:10.1016/j.wear.2024.205379

Zambrano, O. A., Iglesias Guerrero, B., Rodríguez, S. A., Coronado, J. J. (2024). Running in Period During Sliding Wear of Austenitic Steels. Tribology Letters, 72. https://doi.org/10.1007/s11249-024-01867-z

Jiang, S., Qiang, L., Liu, Q., Kouediatouka, A. N., Ji, H., Dong, G. (2024). A friction mechanism for surface texturing under dry/mixed lubrication conditions based on the sublinear dependence of friction on load.Tribology International, 194.https://doi.org/10.1016/j.triboint.2024.109488