Vashisht S, Banerjee S (2023) Cubitus Varus

Miyamura S, Oka K, Abe S et al (2018) Altered bone density and stress distribution patterns in long-standing cubitus varus deformity and their effect during early osteoarthritis of the elbow. Osteoarthritis Cartilage 26:72–83. https://doi.org/10.1016/j.joca.2017.10.004

Article  CAS  PubMed  Google Scholar 

Solfelt DA, Hill BW, Anderson CP, Cole PA (2014) Supracondylar osteotomy for the treatment of cubitus varus in children. Bone Joint J 96–B:691–700. https://doi.org/10.1302/0301-620X.96B5.32296

Article  PubMed  Google Scholar 

You C, Zhou Y, Han J (2021) Loss of correction in cubitus varus deformity after osteotomy. Medicine 100:e27848. https://doi.org/10.1097/MD.0000000000027848

Article  PubMed  PubMed Central  Google Scholar 

Bussink T, Maal T, Meulstee J, Xi T (2022) Augmented reality guided condylectomy. Br J Oral Maxillofac Surg 60:991–993. https://doi.org/10.1016/j.bjoms.2022.01.008

Article  PubMed  Google Scholar 

Blackwell M, Morgan F, DiGioia AM (1998) Augmented reality and its future in orthopaedics. Clin Orthop Relat Res 354:111–122. https://doi.org/10.1097/00003086-199809000-00014

Article  Google Scholar 

Morgan M, Aydin A, Salih A et al (2017) Current status of Simulation-based training tools in orthopedic surgery: A systematic review. J Surg Educ 74:698–716. https://doi.org/10.1016/j.jsurg.2017.01.005

Article  PubMed  Google Scholar 

Misra S, Ramesh KT, Okamura AM (2008) Modeling of Tool-Tissue interactions for Computer-Based surgical simulation: A literature review. Presence: Teleoperators Virtual Environ 17:463–491. https://doi.org/10.1162/pres.17.5.463

Article  Google Scholar 

Carbone M, Condino S, Ferrari V et al (2011) Surgical simulators integrating virtual and physical anatomies. In: Proceedings of CEUR Workshop. Amsterdam, Netherlands, pp 13–18

Cutolo F, Fontana U, Ferrari V (2018) Perspective preserving solution for Quasi-Orthoscopic video See-Through HMDs. Technol (Basel) 6:9. https://doi.org/10.3390/technologies6010009

Article  Google Scholar 

McKnight RR, Pean CA, Buck JS et al (2020) Virtual reality and augmented reality—Translating surgical training into surgical technique. Curr Rev Musculoskelet Med 13:663–674. https://doi.org/10.1007/s12178-020-09667-3

Article  PubMed  PubMed Central  Google Scholar 

Wierzbicki R, Pawłowicz M, Job J et al (2022) 3D mixed-reality visualization of medical imaging data as a supporting tool for innovative, minimally invasive surgery for Gastrointestinal tumors and systemic treatment as a new path in personalized treatment of advanced cancer diseases. J Cancer Res Clin Oncol 148:237–243. https://doi.org/10.1007/s00432-021-03680-w

Article  PubMed  Google Scholar 

García-Sevilla M, Moreta-Martinez R, García-Mato D et al (2021) Augmented reality as a tool to guide PSI placement in pelvic tumor resections. Sensors 21:7824. https://doi.org/10.3390/s21237824

Article  PubMed  PubMed Central  Google Scholar 

Ceccariglia F, Cercenelli L, Badiali G et al (2022) Application of augmented reality to maxillary resections: A Three-Dimensional approach to maxillofacial oncologic surgery. J Pers Med 12:2047. https://doi.org/10.3390/jpm12122047

Article  PubMed  PubMed Central  Google Scholar 

Witowski J, Darocha S, Kownacki Ł et al (2019) Augmented reality and three-dimensional printing in percutaneous interventions on pulmonary arteries. Quant Imaging Med Surg 9:23–29. https://doi.org/10.21037/qims.2018.09.08

Article  PubMed  PubMed Central  Google Scholar 

Aoyama R, Anazawa U, Hotta H et al (2021) The utility of augmented reality in spinal decompression surgery using CT/MRI fusion image. https://doi.org/10.7759/cureus.18187. Cureus

Pierzchajlo N, Stevenson TC, Huynh H et al (2023) Augmented reality in minimally invasive spinal surgery: A narrative review of available technology. World Neurosurg 176:35–42. https://doi.org/10.1016/j.wneu.2023.04.030

Article  PubMed  Google Scholar 

Chaclas N, Dyer O, Mayers A et al (2024) Eye of the carpenter: how well do orthopaedic surgeons estimate angular measurements in derotational osteotomies?? J Pediatr Orthop 44:112–116. https://doi.org/10.1097/BPO.0000000000002525

Article  PubMed  Google Scholar 

Takao M, Nishii T, Sakai T, Sugano N (2017) Comparison of rotational acetabular osteotomy performed with navigation by surgeons with different levels of experience of osteotomies. Int J Comput Assist Radiol Surg 12:841–853. https://doi.org/10.1007/s11548-016-1494-0

Article  PubMed  Google Scholar 

Neal KM, Frederick SW, Corse MR, Cross AR (2021) Evaluation of a Fixed-Angle wedge osteotomy guide. Veterinary Comp Orthop Traumatol 34:032–036. https://doi.org/10.1055/s-0040-1716396

Article  Google Scholar 

Kunze KN, Bovonratwet P, Polce EM et al (2022) Comparison of surgical time, Short-term adverse events, and implant placement accuracy between manual, Robotic-assisted, and Computer-navigated total hip arthroplasty: A network Meta-analysis of randomized controlled trials. J Am Acad Orthop Surg Glob Res Rev 6. https://doi.org/10.5435/JAAOSGlobal-D-21-00200

Sun M-L, Zhang Y, Peng Y et al (2020) Accuracy of a novel 3D-Printed Patient-Specific intramedullary guide to control femoral component rotation in total knee arthroplasty. Orthop Surg 12:429–441. https://doi.org/10.1111/os.12619

Article  PubMed  PubMed Central  Google Scholar 

Miao Z, Li S, Luo D et al (2022) The validity and accuracy of 3D-printed patient-specific instruments for high tibial osteotomy: a cadaveric study. J Orthop Surg Res 17:62. https://doi.org/10.1186/s13018-022-02956-2

Article  PubMed  PubMed Central  Google Scholar 

Song SJ, Bae DK (2016) Computer-Assisted navigation in high tibial osteotomy. Clin Orthop Surg 8:349–357. https://doi.org/10.4055/cios.2016.8.4.349

Article  PubMed  PubMed Central  Google Scholar 

Takeyasu Y, Oka K, Miyake J et al (2013) Preoperative, computer Simulation-Based, Three-Dimensional corrective osteotomy for cubitus Varus deformity with use of a Custom-Designed surgical device. J Bone Joint Surg 95:e173. https://doi.org/10.2106/JBJS.L.01622

Article  PubMed  Google Scholar 

Omori S, Murase T, Oka K et al (2015) Postoperative accuracy analysis of three-dimensional corrective osteotomy for cubitus varus deformity with a custom-made surgical guide based on computer simulation. J Shoulder Elb Surg 24:242–249. https://doi.org/10.1016/j.jse.2014.08.020

Article  Google Scholar 

Omori S, Murase T, Kataoka T et al (2014) Three-dimensional corrective osteotomy using a patient‐specific osteotomy guide and bone plate based on a computer simulation system: accuracy analysis in a cadaver study. Int J Med Rob Comput Assist Surg 10:196–202. https://doi.org/10.1002/rcs.1530

Article  Google Scholar 

Oka K, Murase T, Moritomo H et al (2011) Accuracy of corrective osteotomy using a custom-designed device based on a novel computer simulation system. J Orthop Sci 16:85–92. https://doi.org/10.1007/s00776-010-0020-4

Article  PubMed  Google Scholar 

Dobbe JGG, Vroemen JC, Strackee SD, Streekstra GJ (2013) Patient-tailored plate for bone fixation and accurate 3D positioning in corrective osteotomy. Med Biol Eng Comput 51:19–27. https://doi.org/10.1007/s11517-012-0959-8

Article  CAS  PubMed  Google Scholar 

Gao F, Yang X, Wang C et al (2022) Comparison of clinical and radiological outcomes between calibratable Patient-Specific instrumentation and conventional operation for medial Open-Wedge high tibial osteotomy: A randomized controlled trial. Biomed Res Int 2022:1–11. https://doi.org/10.1155/2022/1378042

Article  CAS  Google Scholar 

Cartiaux O, Paul L, Docquier P-L et al (2010) Computer-Assisted and Robot-Assisted technologies to improve Bone-Cutting accuracy when integrated with a freehand process using an oscillating saw. J Bone Joint Surg 92:2076–2082. https://doi.org/10.2106/JBJS.I.00457

Article  PubMed  Google Scholar 

Martinho FC, Griffin IL, Price JB, Tordik PA (2023) Augmented reality and 3-Dimensional dynamic navigation system integration for osteotomy and Root-end resection. J Endod 49:1362–1368. https://doi.org/10.1016/j.joen.2023.07.007

Article  PubMed  Google Scholar 

Koyachi M, Sugahara K, Tachizawa K et al (2023) Enhanced precision in genioplasty: A novel intraoperative Spatial repositioning using Computer-Aided design and manufacturing technology and a holographic mixed reality application. J Clin Med 12:7408. https://doi.org/10.3390/jcm12237408

Article  PubMed  PubMed Central  Google Scholar 

Kievit AJ, Dobbe JGG, Streekstra GJ et al (2018) Predicted osteotomy planes are accurate when using patient-specific instrumentation for total knee arthroplasty in cadavers: a descriptive analysis. Knee Surg Sports Traumatol Arthrosc 26:1751–1758. https://doi.org/10.1007/s00167-017-4721-5

Article  CAS  PubMed