K. Masuko, M. Shigematsu, T. Hashiguchi, D. Fujishima, M. Kai, N. Yoshimura, S. Okamoto, Achievement of more than 25% conversion efficiency with crystalline silicon heterojunction solar cell. IEEE J. Photovolt. 4(6), 1433–1435 (2014)

Article  Google Scholar 

K.M. Anoop, T.N. Ahipa, Recent advancements in the hole transporting layers of perovskite solar cells. Sol. Energy. 263, 111937 (2023)

Article  Google Scholar 

M. Dey, M. Dey, N.K. Das, A.S. Gupta, M.A. Matin, N. Amin, Performance improvement of highly stable molybdenum telluride solar cells with CZT BSF. In 2017 International Conference on Electrical, Computer and Communication Engineering (ECCE) (pp. 941–975). IEEE (2017)

N. Amin, Introduction of inorganic solar cells. Comprehensive Guide on Organic and Inorganic Solar Cells (57–63). Academic (2022)

S. Mekhilef, R. Saidur, A. Safari, A review on solar energy use in industries. Renew. Sustain. Energy Rev. 15(4), 1777–1790 (2011)

Article  Google Scholar 

M.D. Kelzenberg, S.W. Boettcher, J.A. Petykiewicz, D.B. Turner-Evans, M.C. Putnam, E.L. Warren, H.A. Atwater, Enhanced absorption and carrier collection in Si wire arrays for photovoltaic applications. Nat. Mater. 9(3), 239–244 (2010)

Article  Google Scholar 

P.K. Dakua, D.K. Panda, Implementation of zinc sulfide (ZnS) as a suitable buffer layer for CZTS solar cell from numerical analysis. In Micro and Nanoelectronics Devices, Circuits and Systems: Select Proceedings of MNDCS 2022 (pp. 257–264). Singapore: Springer Nature Singapore (2022)

S. Roula, P. Pattanayak, P.K. Dakua, Investigating impact of electron transport layer engineering in performance enhancement of CH3NH3SiI3 based perovskite solar cells. Phys. Scr. 101(12), 125915 (2026)

Article  ADS  Google Scholar 

S. Roula, H. Jyothula, P.K. Dakua, P. Pattanayak, Optimized lead-free perovskite solar cell with SnS₂ ETL and Spiro-OMeTAD HTL for > 33% efficiency. Discover Electron. 2(1), 79 (2025)

Article  Google Scholar 

M. Akhtaruzzaman, V. Selvanathan, M. Shahiduzzaman, M.I. Hossain, Introduction to organic- inorganic hybrid solar cells. Comprehensive Guide on Organic and Inorganic Solar Cells (187–193). Academic (2022)

N. Ahn, D.Y. Son, I.H. Jang, S.M. Kang, M. Choi, N.G. Park, Highly reproducible perovskite solar cells with average efficiency of 18.3% and best efficiency of 19.7% fabricated via Lewis base adduct of lead (II) iodide. J. Am. Chem. Soc. 137(27), 8696–8699 (2015)

Article  ADS  Google Scholar 

M. Burgelman, P. Nollet, S. Degrave, Modelling polycrystalline semiconductor solar cells. Thin Solid Films. 361–362, 527–532 (2000)

Article  Google Scholar 

S.E. Tsoeu, First-Principles Design of Hybrid Carbon Nitride (C2n) with Gallium Sulphide and Gallium Selenide Two-Dimensional (2D) Materials as High-Performance Photovoltaic Cells (University of Johannesburg, 2021). (South Africa), (2021)

R. Meena, L.K. Lata, P.K. Jain, S.S. Sethi, Design and Simulation of a CdTe/C2N/SnO2 Trilayer Photovoltaic Cell via SCAPS-1D. Curr. Eng. Lett. Rev. 1(1), E140923221095 (2024)

Z. Xiao, Q. Dong, C. Bi, Y. Shao, Y. Yuan, J. Huang, Solvent annealing of perovskite-induced crystal growth for photovoltaic-device efficiency enhancement. Adv. Mater. 26(37) (2014)

Dakua, P. K., Dash, R. K., Laidouci, A., Bhattarai, S., Dudekula, U., Kashyap, S., & Rashed, A.N. Z., Evaluating CZTS Solar Cell Performance Based on Generation and Recombination Models for Possible ETLs Through Numerical Analysis. J. Electron. Mater. 53(4), 2015–2025 (2024)

Z. Kothandapani, M.A. Islam, Y. Reza, A.A. Hasana, N. Amin, Optimization of Cu2O and CuSCN as HTL of planar perovskite solar cells via numerical simulation. J. Ovonic Res. 16(6), 369–377 (2020)

Article  Google Scholar 

P.K. Dakua, D.K. Panda, Improving the efficiency of ZnO/WS2/CZTS1 solar cells using CZTS2 as BSF layer by SCAPS-1D numerical simulation. Phys. Scr. 98(8), 085402 (2023)

Article  ADS  Google Scholar 

Z. Guan, C.S. Lian, S. Hu, S. Ni, J. Li, W. Duan, Tunable structural, electronic, and optical properties of layered two-dimensional C2N and MoS2 van der Waals heterostructure as photovoltaic material. J. Phys. Chem. C 121(6), 3654–3660 (2017)

Article  Google Scholar 

M.A. Kishore, P. Ravindran, Enhanced photocatalytic water splitting in a C2N monolayer by C-site isoelectronic substitution. ChemPhysChem. 18(12), 1526–1532 (2017)

Article  Google Scholar 

X. Wang, Y. Wang, R. Quhe, Y. Tang, X. Dai, W. Tang, Designing strained C2N/GaTe (InTe) heterostructures for photovoltaic and photocatalytic application. J. Alloys Compd. 816, 152559 (2020)

Article  Google Scholar 

A.K. Patel, R. Mishra, S.K. Soni, Efficiency enhancement of CIGS solar cell with C2N buffer layer: A simulation approach by SCAP-1D. In 2023 First International Conference on Microwave, Antenna and Communication (MAC) (pp. 1–5). IEEE, (2023)

X. He, Y. Song, L. Wu, C. Li, J. Zhang, L. Feng, Simulation of high-efficiency CdTe solar cells with Zn1-xMgxO window layer by SCAPS software. Mater. Res. Express. 5(6), 065907 (2018)

Article  ADS  Google Scholar 

P.K. Dakua, D.K. Panda, S. Kashyap, A. Laidouci, Sadanand., Simulation and numerical modeling of high-efficiency CZTS solar cells with a BSF layer. Int. J. Numer. Model. Electron. Networks Devices Fields. 37(2), e3188 (2024)

Article  Google Scholar 

A. Laidouci, V.N. Singh, P.K. Dakua, D.K. Panda, Performance evaluation of ZnSnN2 solar cells with Si back surface field using SCAPS-1D: a theoretical study. Heliyon, 9(10) (2023)

Singh, A., Srivastava, V., Agarwal, S., Lohia, P., Dwivedi, D. K., Umar, A., Dakua, P. K., Enhancing the performance of lead-free La2NiMnO6 double perovskite solar cells through SCAPS-1D optimization. J. Optics 53(4), 3695–3707 (2024)

P.K. Dakua, D.K. Panda, S. Kashyap, A. Laidouci, Sadanand, Simulation and numerical modeling of high-efficiency CZTS solar cells with a BSF layer. Int. J. Numer. Model. Electron. Networks Devices Fields. 37(2), e3188 (2024)

Article  Google Scholar 

O.K. Simya, A. Mahaboobbatcha, K. Balachander, A comparative study on the performance of Kesterite based thin film solar cells using SCAPS simulation program. Superlattices Microstruct. 82, 248–261 (2015)

Article  ADS  Google Scholar 

P.K. Dakua, D.K. Panda, Improving the efficiency of ZnO/WS2/CZTS1 solar cells using CZTS2 as BSF layer by SCAPS-1D numerical simulation. Phys. Scr. 98(8), 085402 (2023)

Article  ADS  Google Scholar 

S.E. Tsoeu, F. Opoku, P.P. Govender, Tuning the electronic, optical and structural properties of GaS/C2N van der Waals heterostructure for photovoltaic application: first-principle calculations. SN Appl. Sci. 2(3), 341 (2020)

Article  Google Scholar 

M. Hosenuzzaman, N.A. Rahim, J. Selvaraj, M. Hasanuzzaman, A.A. Malek, A. Nahar, Global prospects, progress, policies, and environmental impact of solar photovoltaic power generation. Renew. Sustain. Energy Rev. 41, 284–297 (2015)

Article  Google Scholar 

W. Ahmad, W. Farooq, A.D. Khan, A. Alanazi, K. Adnan, Optimization of Thin-Film Carbon Nitride (C2N) based solar cell via Zn1 – xMgxO (as a buffer layer) (2022)

S. Yasin, Z.A. Waar, A. Zoubi, T., M. Moustafa, Optoelectronic simulation of a high efficiency C2N based solar cell via buffer layer optimization. Opt. Mater. 119, 111364 (2021)

Article  Google Scholar