A. Kojima, K. Teshima, Y. Shirai, T. Miyasaka, Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J. Am. Chem. Soc. 131(17), 6050–6051 (2009)
N.J. Jeon, J.H. Noh, W.H. Yang, Y.C. Kim, S.I. Ryu, J. Seo, S.I. Seok, Compositional engineering of perovskite materials for high-performance solar cells. Nature 517(7535), 476–480 (2015)
K. Wang, C. Liu, P. Du, X. Zhang, Y. Li, \(\text_2\)-based electron transport layers for perovskite solar cells: mechanisms, properties, and modification strategies. J. Mater. Chem. A 6(2), 476–489 (2018)
J. Seo, N.-G. Park, Benefits of doping spiro-ometad with cobalt(iii) complexes in perovskite solar cells. Adv. Energy Mater. 6(21), 1601496 (2016)
N.-G. Park, Perovskite solar cells: an emerging photovoltaic technology. Mater. Today 18(2), 65–72 (2015)
T.A. Berhe, W.-N. Su, C.-H. Chen, C.-J. Pan, J.-H. Cheng, H.-M. Chen, M.-C. Tsai, L.-Y. Chen, A.A. Dubale, B.-J. Hwang, Organometal halide perovskite solar cells: degradation and stability. Energy Environ. Sci. 9(2), 323–356 (2016)
J. Jiang, X. Meng, Y. Zhao, Q. Li, Numerical analysis of perovskite solar cells using comsol multiphysics: effect of layer thickness and defect density on performance. Sol. Energy 159, 160–169 (2018)
M. Liu, M.B. Johnston, H.J. Snaith, Efficient planar heterojunction perovskite solar cells by vapor deposition. Nature 501(7467), 395–398 (2013)
W.-S. Yang, J.H. Noh, N.J. Jeon, Y.C. Kim, S.I. Ryu, J. Seo, S.I. Seok, Stabilized efficiency over 20% for planar perovskite solar cells with minimal hysteresis. Science 356(6345), 1376–1379 (2017)
M.A. Green, E.D. Dunlop, J. Hohl-Ebinger, M. Yoshita, N. Kopidakis, X. Hao, Solar cell efficiency tables (version 62). Prog. Photovoltaics Res. Appl. 31(1), 3–12 (2023)
D. Li, J. Wu, P. Wu, Y. Lin, Y. Sun, R. Zhu, J. Yang, and K. Xu, Glucose measurement using surface plasmon resonance sensor with affinity based surface modification by borate polymer, in 2015 Transducers-2015 18th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS).IEEE, pp. 1569–1572 (2015)
C.H. Hsu, Device physics and optimization of thin-film photovoltaic devices. IEEE J. Photovolta. (2020)
M. Mehran, Numerical analysis of high-efficiency thin-film solar cells, Solar Energy (2019)
S. Selberherr, Analysis and Simulation of Semiconductor Devices (Springer, Vienna, 1984)
T. Markvart, L. Castañer, Principles of solar cell operation (Elsevier, 2003)
W. Shockley, W.T. Read, Statistics of the recombinations of holes and electrons. Phys. Rev. 87(5), 835–842 (1952)
M.A. Green, A. Ho-Baillie, H.J. Snaith, The emergence of perovskite solar cells. Nat. Photon. 8, 506–514 (2014)
N.J. Jeon, J.W. Noh, Y.C. Kim, W.S. Yang, S. Ryu, S.I. Seok, Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells. Nat. Mater. 13, 897–903 (2014)
M.M. Lee, J. Teuscher, T. Miyasaka, T.N. Murakami, H.J. Snaith, Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites. Science 338(6107), 643–647 (2012)
N.-G. Park, Organometal perovskite light absorbers toward a 20% efficiency low-cost solid-state mesoscopic solar cell. J. Phys. Chem. Lett. 4(15), 2423–2429 (2013)
H.S. Kim, C.W. Lee, N.-G. Jang et al., Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%. Sci. Rep. 2, 591 (2012)
J. Burschka, N. Pellet, S.J. Moon et al., Sequential deposition as a route to high-performance perovskite-sensitized solar cells. Nature 499, 316–319 (2013)
H. Choi, J.H. Jeong, H.S. Kim et al., High-performance mesoporous perovskite solar cells with compositional engineering. Nano Energy 7, 80–85 (2014)
Z. Hawash, L.K. Ono, Y. Qi, Recent advances in spiro-ometad hole transport material and its applications in perovskite solar cells. Adv. Mater. Interfaces 5(1), 1700623 (2018)
M. Saliba, T. Matsui, K. Domanski et al., Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance. Science 354(6309), 206–209 (2016)
T. Leijtens, G.E. Eperon, N.K. Noel et al., Stability of metal halide perovskite solar cells. Adv. Energy Mater. 5(20), 1500963 (2015)
A. Umar, A.A. Ibrahim, S. Baskoutas, G.C. Adhikari, High power-conversion efficiency of lead-free perovskite solar cells: a theoretical investigation. IEEE Access 8, 106346–106353 (2020)
M.A. Green, Solar cells: operating principles, technology, and system applications (Prentice-Hall, 1982)
A. Beer, Bestimmung der absorption des rothen lichts in farbigen flüssigkeiten. Ann. Phys. 162, 78–88 (1852)
J.H. Lambert, Photometria. Eberhard Klett (1760)
J. Nelson, The physics of solar cells (Imperial College Press, 2003)
ASTM International, Astm g173–03(2020): Standard tables for reference solar spectral irradiances, https://www.astm.org, 2020, aM1.5G solar spectrum
E. Hecht, Optics, (2017). (5th ed. Pearson)
Q. Jiang, Y. Zhao, X. Zhang, X. Yang, Surface passivation of perovskite film for efficient solar cells. Nat. Photon. 13, 460–466 (2019)
M. Born, E. Wolf, Principles of Optics (Cambridge University Press, 1999), (7th ed) (1999)
W. Shockley, W.T. Read, Statistics of the recombinations of holes and electrons. Phys. Rev. 87(5), 835–842 (1952)
National Renewable Energy Laboratory (NREL), Reference solar spectral irradiance: Astm g173, 2012, used for EQE and wavelength–photon conversions (2012) https://www.nrel.gov/grid/solar-resource/spectra.html
M.A. Green, A. Ho-Baillie, H.J. Snaith, The emergence of perovskite solar cells. Nat. Photon. 8(7), 506–514 (2014)
H.J. Snaith, Perovskites: the emergence of a new era for low-cost, high-efficiency solar cells. J. Phys. Chem. Lett. 4(21), 3623–3630 (2013)
S.D. Stranks, H.J. Snaith, Metal-halide perovskites for photovoltaic and light-emitting devices. Nat. Nanotechnol. 10(5), 391–402 (2015)
T. Kirchartz, U. Rau, What makes a good solar cell? Adv. Energy Mater. 6(13), 1600819 (2016)
N.J. Jeon, J.H. Noh, W.S. Yang, Y.C. Kim, S. Ryu, J. Seo, S.I. Seok, Compositional engineering of perovskite materials for high-performance solar cells. Nature 517(7535), 476–480 (2015)
M. Saliba, T. Matsui, J. Seo, K. Domanski, J.-P. Correa-Baena, M.K. Nazeeruddin, S.M. Zakeeruddin, W. Tress, A. Abate, A. Hagfeldt, M. Grätzel, Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency. Energy Environ. Sci. 9(6), 1989–1997 (2016)
S.M. Sze, K.K. Ng, Physics of Semiconductor Devices (Wiley, 2007), (3rd ed.) (2007)
J. Nelson, The physics of solar cells (Imperial College Press, 2003)
M.A. Green, Radiative efficiency of state-of-the-art photovoltaic cells. Prog. Photovolta. 20, 472–476 (2012)
W. Tress, Perovskite solar cells on the way to their radiative efficiency limit. Adv. Energy Mater. 7(14), 1602358 (2017)
M. Burgelman, P. Nollet, S. Degrave, Modelling polycrystalline semiconductor solar cells. Thin Solid Films 361–362, 527–532 (2000)
Q. Jiang et al., Numerical simulation of planar perovskite solar cells. Sol. Energy Mater. Sol. Cells 148, 67–75 (2016)
R. Wang et al., Zno electron transport layers for efficient perovskite solar cells. J. Power Sources 360, 247–254 (2017)
D. Zhao et al., Cuscn as a hole transport material for perovskite solar cells. Adv. Energy Mater. 8, 1702284 (2018)
H. Min et al., Perovskite solar cells with atomically coherent interlayers on \(\text_2\) electrodes. Nature 598, 444–450 (2021)
J. Kim et al., \(\text_x\) hole transport layers for efficient and stable perovskite solar cells. ACS Energy Lett. 5, 180–187 (2020)
Y. Zhou et al., Interface engineering for efficient zno-based perovskite solar cells. Adv. Energy Mater. 9, 1900293 (2019)
P. Docampo et al., Planar perovskite solar cells with high efficiencies. Energy Environ. Sci. 7, 1789–1796 (2014)
A. Abrusci et al., High-performance perovskite–polymer solar cells. Energy Environ. Sci. 6, 3124–3128 (2013)
Comments (0)